twitter

House of Warfare

Catalogue

house of warfare

 Sword Holder  (Black)

SKU-701164


Size : 6" X 5"

Approx Weight : 136 Gm

Black Throwing Axe Carrier   

SKU-700474

These axe holder are perfect for any cosplayer viking or renfaire goer. these holders are designed to hold a throwing axe to a 2" wide belt. The holder will be fit an axe handle under 1.5 inches wide.

Brown Leather Frog for One

SKU-700491

This leather frog was designed to hold a sword. Easily turn any waist belt into a sword belt with this leather holder and its extra large steel ring. Just slide it onto either side (Left or Right).

KEY FEATURES:

* High quality thick leather

* Steel Rivets hold the ring in place

* Fits up to a 2 in wide waist belt

* Right or Left hand draw

* The outer ring measures 2.50 inches and the inner measure 2.4 inches

Measurements:

Height: 6 inches

Width: 1.5 inches

Brown Leather Medieval Sword Frog  

SKU-700489

Our leather medieval sword frog is slim, sleek and wont detract from your sword. This type of frog holds sword vertically from your medieval belt and can be used for single hand medieval or renaissance swords. Designed to be used by either right or left handed people and will fit a scabbard that is 2 inches wide up to 3 inches wide.

Length : 16cm

* Top Grain leather

* 3 Steel Rivets hold the frog in place

* Adjustable fits 2in to 3in wide scabbards

* Fits up to a 2 in wide waist belt

* Use for single Hand Medieval - Renaissance Sword

* Great for Renaissance Faires

* Right or left hand draw

* Holds sword vertically

Sword Holder  (Brown)  

SKU-701166

 

Size : 7" X 4.5"

Approx Weight : 146 Gm

Brown Deluxe Leather Sword Frog             

SKU-700449

Our sword frogs specially design to suspend large /heavy scabbards, vertically from a waist belt. These are made from high quality leather. Extra long laces/ties are there to suit all sizes of scabbards. Strong enough to hold the sword on its place properly.

Size : 8"

Approx Weight : 92 Gm

Frog (Black)

SKU-701168


Size : 3.5" X 2.5"

Approx Weight : 76 Gm

Black Leather Frog for One

SKU-700490

This leather frog was designed to hold a sword. Easily turn any waist belt into a sword belt with this leather holder and its extra large steel ring. Just slide it onto either side (Left or Right).

KEY FEATURES:

* High quality thick leather

* Steel Rivets hold the ring in place

* Fits up to a 2 in wide waist belt

* Right or Left hand draw

* The outer ring measures 2.50 inches and the inner measure 2.4 inches

Measurements:

Height: 6 inches

Width: 1.5 inches

Sword Holder Two Loops (Black)  

SKU-700754

A black leather sword holder or frog great for your next SCA, LARP, cosplay, medieval or viking festival or event. It can fit a wide variety of sword and scabbards. The frog comes with adjustable lacing, so that the wearer can fit the frog for sizes that accommodate a dagger to holding a long sword. The two loops are large enough to fit wide renaissance belts of up to 6cm.

Size : 7.5" X 7.5"

Approx Weight : 112 Gm

Leather Axe Holder for Belt (Black)          

SKU-700462

Leather axe holder – you may also call it – axe ring, loop belt hanger or holster made of pure genuine leather and quality work men ship it serves purpose perfectly.  It has four studs fixing the loops and reinforced with shoe stitching.

Size : 7.5",

Approx Weight : 93 Gm

Black Angled Sword Frog Medieval   

SKU-700486

This frog is designed to hold medieval sword scabbards at an angle from a waist belt. It comes with extra long ties that adjust to fit all size scabbards. 12 heavy-duty rivets to securely hold your sword in place. 6 inches wide by 7 inches long.

KEY FEATURES:

* High quality leather

* 12 brass eyelets hold the frog in place

* Adjustable fit

* Fits up to a 2 in wide waist belt

* Use for medieval single hand sword

* Great for renaissance faires & reenactments

Black Leather Broadsword Frog   

SKU-700695

The leather broadsword frog is hand crafted of durable, full grain leather complete with nickel plated, metal studs. with its ingenious dual strap design, this frog will support both broadsword and scabbard and is designed to fit almost any belt. This frog will hold your sword securely. Size : 6.5"X4"

Made from top grade leather. Securely holds any size sword at your waist. Simple design goes nicely with many different looks.

Authentic Axe Holder

SKU-700874

This leather frog was designed to hold a axe. Easily turn any waist belt into a sword belt with this leather holder and its extra large handforged twisted ring. Just slide it onto either side (Left or Right). Fits up to a 2 in wide waist belt. The outer ring measures 2.50 inches and the inner measure 2.4 inches.

Height: 6 inches
Width: 1.5 inches

Leather Frog for Metal Sword or Latex-LARP      

SKU-700493

High quality leather frog for metal sword or latex regular size is adjustable from 2 1/2" to 3 1/2" wide metal sword. Will fit on a belt up to 2" wide.

Size : 7.5"

Approx Weight : 109 Gm

Black Deluxe Leather Sword Frog             

SKU-700448

Our sword frogs specially design to suspend large /heavy scabbards, vertically from a waist belt. These are made from high quality leather. Extra long laces/ties are there to suit all sizes of scabbards. Strong enough to hold the sword on its place properly.

Size : 8"

Approx Weight : 92 Gm

Pistol Belt Holder (Brown)  

SKU-701209

 

Size : 7"X 5.5"

Approx Weight : 114 Gm

Authentic Axe Holder

SKU-700873

This leather frog was designed to hold a axe. Easily turn any waist belt into a sword belt with this leather holder and its extra large handforged twisted ring. Just slide it onto either side (Left or Right). Fits up to a 2 in wide waist belt. The outer ring measures 2.50 inches and the inner measure 2.4 inches.

Height: 6 inches
Width: 1.5 inches

Leather Axe Holder for Belt  (Brown)       

SKU-700463

Leather axe holder – you may also call it – axe ring, loop belt hanger or holster made of pure genuine leather and quality work men ship it serves purpose perfectly.  It has four studs fixing the loops and reinforced with shoe stitching. Size : 7.5",  Approx Weight : 93 Gm

Frog  (Brown)

SKU-701169


Size : 3.5" X 2.5"

Approx Weight : 65 Gm

Brown Throwing Axe Carrier    

SKU-700475

These axe holder are perfect for any cosplayer viking or renfaire goer. these holders are designed to hold a throwing axe to a 2" wide belt. The holder will be fit an axe handle under 1.5 inches wide.

Sword Holder Two Loops (Brown)

SKU-700458

A brown leather sword holder or frog great for your next SCA, LARP, cosplay, medieval or viking festival or event. It can fit a wide variety of sword and scabbards. The frog comes with adjustable lacing, so that the wearer can fit the frog for sizes that accommodate a dagger to holding a long sword. The two loops are large enough to fit wide renaissance belts of up to 6cm.

Size : 7.5" X 7.5"

Approx Weight : 112 Gm

Sword Holder  (Brown)

SKU-701167


Size : 6" X 5"

Approx Weight : 110 Gm

Brown Leather Broadsword Frog   

SKU-700485

The leather broadsword frog is hand crafted of durable, full grain leather complete with nickel plated, metal studs. with its ingenious dual strap design, this frog will support both broadsword and scabbard and is designed to fit almost any belt. This frog will hold your sword securely. Size : 6.5"X4"

Made from top grade leather. Securely holds any size sword at your waist. Simple design goes nicely with many different looks.

Black Leather Medieval Sword Frog  

SKU-700488

Our leather medieval sword frog is slim, sleek and wont detract from your sword. This type of frog holds sword vertically from your medieval belt and can be used for single hand medieval or renaissance swords. Designed to be used by either right or left handed people and will fit a scabbard that is 2 inches wide up to 3 inches wide. Length : 16cm

* Top Grain leather

* 3 Steel Rivets hold the frog in place

* Adjustable fits 2in to 3in wide scabbards

* Fits up to a 2 in wide waist belt

* Use for single Hand Medieval - Renaissance Sword

* Great for Renaissance Faires

* Right or left hand draw

* Holds sword vertically

Sword Holder  (Black)  

SKU-701165


Size : 7" X 4.5"

Approx Weight : 144 Gm

Brown Angled Sword Frog Medieval   

SKU-700487

This frog is designed to hold medieval sword scabbards at an angle from a waist belt. It comes with extra long ties that adjust to fit all size scabbards. 12 heavy-duty rivets to securely hold your sword in place. 6 inches wide by 7 inches long.

KEY FEATURES:

* High quality leather

* 12 brass eyelets hold the frog in place

* Adjustable fit

* Fits up to a 2 in wide waist belt

* Use for medieval single hand sword

* Great for renaissance faires & reenactments

google+
facebook

Follow Us :